Current position > Contact Us
Note: Although you do not allow the translation of Memcor CP, here is a brief introduction: it is a "high-pressure membrane filtration system" developed by Siemens AG in Germany; transmitter refers to a transmitter rather than a sensor conductor ; Scope of Supply is translated as supply scope , but remember that this is not from the perspective of the geographical location of customers, but from the perspective of what types of products the company supplies; Clean in Place (CIP) "refers to" in place cleaning "or" online cleaning ", and I personally think the former is more suitable and authentic. The translation of unit must be based on the context. In this article, some parts are translated as unit , while others are translated as device. This soft scale is difficult to grasp. This article summarizes the main process routes and operating guidelines of the Memcor CP system. Each CP unit is equipped with a magnetic feedwater flow meter (loose for on-site installation) and a feedwater and filtration pressure transmitter, as well as an automatic valve that allows each unit to operate independently. The Memcor CP system includes the following subsystems (or sub systems), which are described in more detail in the "Scope of Supply" and standard specification documents: a set of operable membrane filtration devices to meet operational requirements. This also includes using alternative devices to meet other requirements, such as allowing liquid flow throughout the entire system during on-site cleaning and/or device maintenance. In situ cleaning system. The system includes a hot water storage tank (on-site cleaning tank), a chemical transfer system, an on-site cleaning recirculation pump, all necessary valves, and monitoring instruments. The air flushing system consists of one or more fans used for air flushing of the membrane fibers in the unit. The air compression system includes compressors, air containers, air filtration equipment, backwash air regulators, and instruments. The control system is used to assist in the overall system and unit control, determine and allocate common or shared resources, and allow interaction between local and remote systems. In addition, depending on the specific on-site configuration, the Memcor CP system may also include the following equipment: a feedwater pump system consisting of one or more pumps used to distribute feedwater to various membrane units. The chemical neutralization system consists of one or more chemical waste liquid tanks, recirculation/discharge pumps, chemical metering systems, and monitoring instruments.
Transformer sensors, cylinders, air cylinders, BREAKER, CIRCUIT, CONTACTOR circuit breakers, ABB CONTACTOR, POWER MODULE circuit breakers, power modules, ACE APPROBER, SHOCK shock absorbers, and ACME Transformers buffers.
; Contactor Transformer ACOPIAN POWER SUPERY Power Supply, Transformer AEG LEVEL TRANSMITTER, ENCODER Level Control, Decoder AEROQP HOSE, FITTING Pressure Throat, Throat, Throat AGASTAT THERMOSTATE, THERMOCOUPLE Thermostatic Device, Temperature Gauge AIRGUARD Filter, Filter Screen AIRPEL Cylinder CYLINDER, VALVE Cylinder, Valve AIRPOT Cylinder Air Cylinder Valve ANLY COUNTER, TIMER, SOCKET counter, time system, socket ANVER Vacuum Pad, Air Pump vacuum suction cable, vacuum pump APPLO VALVE, BRONZE BALL ball valve ASCO Valve VALVE va
